Slot channel modular system with inner width 100mm. type TMP

 

 

SPK KAG KYG 400 multi
SPK LAG LYG 230 multi
SPK OAG OYG 230 multi
MODEL: TMP-KAG-KYG
Spout on one side descending on spout.
Drainage pit with odor trap.
MODEL: TMP-LAG-LYG
Spout descending from an angle at the spout.
Drainage pit with odor trap.
MODEL: TMP-OAG-OYG
Center drain descending to the spout.
Drainage pit with odor trap
SPK 3AG 3YG 230 multi
TMP 3AG 3YG 300 doorsnee
SPK KA2G 8 KY2G 8 400 multi
MODEL: TMP-3AG-3YG
T-shaped drains
center drain - descending to the drain.
Drainage pit with odor trap.
 
MODEL:TMP -MULTITwo or more drains
with odor lock each from point
descend to the drain.

 

 

STANDARD FEATURES

- With a channel with a minimum depth of 95 mm and a maximum depth of 200 mm, it is possible to build a continuous continuous waste water drainage system with a maximum length of 18000 mm, with a constant slope of 0.6% towards the drain.
- The trenches can be made to the desired dimensions, provided that they meet the slope, minimum and maximum depth.
- By reducing the slope of the gutter, it is possible to construct a trench up to a maximum length of 70.00 meters.
- By using several floor drains, it is possible to construct a trench of several meters.
- The slot channel is provided on both sides with adjustbale feet and anchorage strips with a mutual distance of 500 mm. This allows the trench to be attached to a concrete surface and adjusted in height.
- The drains with a plate thickness of 2.00 mm is provided with a flange of 35.00 mm. This is provided with a gasket and is attached with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).

OPTIONS
- On request, this drain system can be made of stainless steel AISI 316 quality.
- A PVC or stainless steel filler profile can be used to simplify assembly and to strengthen the load-bearing capacity of the upper profile.

 

 

 

  

Stainless steel products