Heavy industrial duty.
Factory halls, workshops, production areas, meat processing, fish processing, bakeries, breweries

Class B125 Heavy duty up to 12500kg.
Class C250 Heavy duty up to 25000kg.
Class D400 Heavy duty up to 40000kg.
Class E600 Heavy duty up to 60000kg.

The strips of the mesh gratings are welded both from above and below so that tilting of the strips is prevented.

 

 

maasroosterversterkt k

STRENGTHENED MESH GRATING

The reinforced mesh gratings look like a honeycomb with holes of 20 x 20 mm.

Reinforced mesh gratings consist of 25 mm wide and 1.2 mm thick steel strips that interlock like combs, surrounded and reinforced by a 25 x 5 mm edge.

The reinforced mesh gratings are argon arc welded on both sides and at all intersections. Because it is fully welded, if used under appropriate conditions, it will stay like new for years without bending over or curling.

Reinforced mesh gratings are made entirely from 18/8 Cr / Ni (AISI 304 quality) stainless steel.

 

 

 


 maasroostersmal k

FINE MESH GRATINGS

Fine mesh channel gratings have a honeycomb with holes of 10 X 20 mm. Thanks to the small holes of 10 mm, even a transport trolley with the smallest wheel can easily pass over it

Fine mesh channel gratings consist of 25 mm wide and 1.2 mm thick steel strips that interlock like crests surrounded by a 25 mm wide and 1.5 mm thick edge.

The fine mesh channel gratings are argon arc welded on both sides and at all intersections.

Because it is fully welded, if used under appropriate conditions, it will stay like new for years without bending over or curling.

 

 

 


symetrisch ovaal versterkt k

REINFORCED GRATINGS WITH SYMMETRIC OVAL HOLES

These reinforced gratings are provided in the surface across the width with adjacent oval holes of 35 x 7 mm. The length of the grid is provided with the same number of holes in rows with 15 mm intervals between them.

All holes are countersunk. In this way the strength is increased and you can even walk on it with bare feet.

Completely made of 18/8 Cr / Ni (AISI 304 quality) stainless steel

 

 

 

 

 


ovaal versterkt k

REINFORCED STAINLESS STEEL GRID WITH ASYMMETRIC OVAL HOLES

Reinforced gratings with asymmetrical oval holes have rows of oval holes of 40 x 7 mm along the length of the surface with mutual spaces of 22 mm. The spacing between two rows of oval holes is 15 mm, with the second row offset from the first row.

All holes are countersunk. In this way the strength is increased and you can even walk on it with bare feet.

To prevent slipping, protruding round bumps have been formed on the surfaces of reinforced channel gratings with asymmetrical oval holes.

Complete from 18/8 Cr / Ni (AISI 304 quality) stainless steel

 

 


 


spijlenrooster u profiel k

REINFORCED STAINLESS STEEL GRATINGS WITH U-PROFILE

Stainless steel bar gratings consist of a frame within which U-steel strips are parallel to each other over the entire width of the frame with a gap of 20 mm.

After the bar gratings on both sides have been welded with argon arc at all intersections, they are chemically cleaned (passivation).

 

 

 

 

 

 


 

spijlenrooster k

STAINLESS STEEL BAR GRATINGS

Stainless steel bar gratings consist of a frame within which steel strips are located parallel to each other over the entire width of the frame with a gap of 20 mm.

After the bar gratings on both sides have been argon arc welded at all intersections, they are chemically cleaned (passivation).

Completely made of 25 x 5 mm 18/8 Cr / Ni (AISI 304 quality) stainless steel

 

 

 

 

 


 

geperforeerd zwaar k

PERFORATED STAINLESS STEEL GRATINGS - REINFORCED

Perforated stainless steel gratings are manufactured in such a way that a space of 15 mm wide remains continuously along the length of the gratings and on both sides of the gratings over the gutter.

The water on the subsurface is led to the gutter via these spaces.

The fully sealed plate is 5.00 mm thick and subdivided with steel strips of 20 x 5 mm that support this plate and reinforce it across the width from below.

Made entirely from 18/8 Cr / Ni (AISI 304 quality) stainless steel

 

 

 

 


 hermetisch k

STAINLESS STEEL COVER - REINFORCED

Stainless steel cover plates can be used in places where the drain gutters pass under equipment, at door openings and in places where the drain gutter passes through departments that never get wet.

A pattern is made on the surfaces of the cover plates consisting of bumps protruding upwards, in order to prevent slipping

The 2.0 mm thick cover plate is reinforced across the width with 20 x 5 mm steel strips that are approximately 150 mm apart.

Completely made of 18/8 Cr / Ni (AISI 304 quality) stainless steel

.

Stainless steel products